Vlotho IMPRAFETT Hydrophobic Leather Oil

VLOTHO IMPRAFETT — professional hydrophobic oil for natural leather and nubuck. Designed to provide water-repellent properties, restore the fat balance, and create a pleasant oily hand feel. Especially recommended for treating non-hydrophobic crust leather and products used in high-humidity conditions.
The product is a composition of fatty polymers with a high level of solids, deeply penetrating the leather structure, enhancing its performance properties, and increasing moisture resistance. When applied to previously hydrophobized leather, the water-repellent properties are not diminished but maintained at a high level.

BENEFITS

• gives leather pronounced water-repellent properties;

• has high fat-content ability;

• restores the natural softness and elasticity of the leather;

• creates a pleasant oily hand feel;

• suitable for treating top-grain leather and nubuck;

• ideal for hydrophobic finishing of non-hydrophobic crust leather;

• does not reduce previously acquired water-repellent properties of the leather;

• penetrates deeply into the material structure;

• suitable for professional use.

APPLICATION

Used for hydrophobic and fat finishing of top-grain leather, nubuck, and crust leather, as well as for restoring water-repellent properties after cleaning, restoration, or use.

DIRECTIONS FOR USE

1. Clean the leather surface from dirt and allow it to dry completely.

2. Stir the product thoroughly before use.

3. Apply a thin, even layer using a sponge, soft cloth, applicator, or spray gun.

4. Allow the product to fully absorb.

5. If necessary, apply a second layer.

6. After full absorption, polish the surface with a soft cloth. For nubuck, after drying, it is recommended to raise the nap with a special brush.

SPECIFICATIONS

Type: hydrophobic leather oil.
Base: composition of fatty polymers.
Purpose: hydrophobic and fat finishing for leather.
Suitable for: top-grain leather, crust, and nubuck.
Appearance: amber liquid.
Solid content: about 98%.
Density: about 0.98 g/cm³ (at 25 °C).
Viscosity: about 400 cPs (at 25 °C).
Storage temperature: from +5 °C to +35 °C.

RECOMMENDATIONS

• Before treating the entire item, test on a less visible area first.

• Do not apply excessive amounts — this may increase absorption time.

• After treating nubuck, it is recommended to restore the nap with a special brush.

• Avoid freezing the product and prolonged storage in direct sunlight or at high temperatures.