Vlotho LEDERFETT Nourishing Leather Oil

VLOTHO LEDERFETT — a professional water-based nourishing oil for natural leather. Designed for deep nourishment, softening, and restoring leather elasticity before further finishing or dyeing. Thanks to its high penetration ability, it evenly saturates both surface and inner layers of the leather, contains no organic solvents, and does not diminish the adhesion of subsequent coatings.
After treatment, the leather becomes softer, more elastic, and pleasant to the touch; the material's appearance improves, the surface evens out, and a subtle natural shine appears.VLOTHO LEDERFETT highly recommended for crust, aniline, top-grain, and corrected-grain leathers, as well as for restoring over-dried leather after prolonged use.

BENEFITS

• deeply nourishes and softens natural leather;

• restores elasticity and durability to the grain surface;

• features high penetration ability;

• contains no organic solvents;

• prevents drying out and reduces the risk of leather cracking;

• improves appearance and gives leather a light natural shine;

• does not migrate to the flesh side;

• does not reduce the adhesion of subsequent coatings;

• suitable for professional use.

APPLICATION

This product is used for pre-nourishing and softening crust, top-grain, corrected-grain, aniline leathers, as well as vegetable and chrome-tanned leathers. It is applied prior to further finishing, dyeing, or mechanical processing of leather.

DIRECTIONS FOR USE

1. Clean the leather surface from dirt and allow it to dry completely.

2. Stir the product thoroughly before use.

3. For manual application, spread a thin, even layer using a sponge, applicator, or soft cloth.

4. For professional use, the product can be applied with a roller machine or spray gun. When spraying, it is recommended to dilute with water at a ratio of 1:1.

5. Recommended consumption is 70–80 g/m².

6. After application, it is advised to allow the leather to absorb for at least several hours, ideally overnight.

7. Once fully absorbed, mechanical processing, ironing, or further finishing of the leather can be performed.

SPECIFICATIONS

Type: nourishing leather oil.
Base: water-oil composition.
Purpose: nourishment, softening, and restoration of natural leather before finishing.
Suitable for: suitable for crust, top-grain, corrected-grain, aniline leathers, as well as vegetable and chrome-tanned leathers.
Application method: sponge, applicator, soft cloth, roller machine, or spray gun.
Dilution for spraying: water 1:1.
Recommended consumption: 70–80 g/m².
Solid content: no less than 55%.
Storage temperature: from 0 °C to +30 °C.
Shelf life: 12 months.

RECOMMENDATIONS

• Before treating the entire item, test on a less visible area first.

• For optimal results, it is recommended to leave the treated leather overnight for deep absorption of the product.

• Before further finishing, ensure the product has fully absorbed.

• Store the product in a tightly closed container, protected from direct sunlight and freezing.