Bag with shaped handle attachments — trial leather patterns
Bag with shaped handle attachments: dimension setup, PDF, SVG, and DXF patterns, and A4 printing. Trial construction based on publicly available references; check the dimensions and assembly on a mock-up.
According to the diagram: height 250 mm, base 350 × 120 mm, handles 450 mm. The 6 cm label is ambiguous: the handle blank width was set to 45 mm, and the handle folds into thirds. Side panels, zipper facings, and shaped attachments were reconstructed from photos.
Open this example in the designerThe example opens with the dimensions specified below. Its changes are saved separately from your regular work. You can return to it using the link in the editor.
Example source parameters
Linear dimensions are given in millimeters. Parameter names match the designer fields; these are the initial settings and can be changed.
| Parameter | Value |
|---|---|
| Body width | 350 |
| Body height | 250 |
| Body depth | 120 |
| Handle blank length | 450 |
| Fastener spacing | 145 |
| Handle width | 45 |
| Strap blank | 1100 |
| Strap width | 20 |
| Leather thickness | 1.5 |
| Stitch offset from edge | 4 |
| Additional seam allowance | 0 |
Parts in this example
The dimensions below are derived from the geometric model. The parts list changes with the parameters and enabled options.
| Piece | Size, mm |
|---|---|
| Front wall | 350.0 × 250.0 |
| Back panel | 350.0 × 250.0 |
| Bottom | 350.0 × 120.0 |
| Side panel · left | 120.0 × 253.2 |
| Side panel · Right | 120.0 × 253.2 |
| Zipper facing · Back | 269.5 × 56.0 |
| Zipper facing · Front | 269.5 × 56.0 |
| Handle with shaped ends · Front | 45.0 × 450.0 |
| Handle with shaped ends · Back | 45.0 × 450.0 |
| Shoulder strap attachment | 20.0 × 65.0 |
| Shoulder strap attachment | 20.0 × 65.0 |
| Shoulder strap | 1100.0 × 20.0 |
How the size changes the pattern piece
Calculation example: the “body width” parameter was changed from 350 to 385 mm. The diagram shows the “Front wall” piece before and after recalculation at the same scale.
You can also download the modified JSON project. After modification, check the assembly on a mockup.
Download the pattern example
The files were generated using the standard VLOTHO CAD export from the parameters specified above. They show the model geometry and do not replace checking the product in the material.
PDF A4, 27 sheetsPDF patterns, 1:1SVG patterns, 1:1DXF patterns, mmJSON project
PDF A4 automatically selects portrait or landscape pages and rotates the pieces to reduce the number of sheets. For assembly, a 10 mm overlap, numbers, and alignment marks are provided. The standard PDF contains one piece per page. Both variants include a 100 mm test segment. For your own dimensions, modify the project and export a new PDF. How to print patterns at 1:1 scale.
What to check before cutting
The patterns have not been verified by sewing. Dimensions are approximate and not to scale; assemble a mock-up first. The card contains a generated illustration of the proposed product.
VLOTHO CAD builds a geometric prototype. Allowances for bending, skiving, assembly thickness, and construction methods are determined by your material. Start with a paper mockup and a trial piece.
How to get a pattern for your dimensions
- Open the model and set the dimensions in millimeters. To reproduce the tabular example, first load its JSON.
- Check the parts list and enabled options. Adjust the seam and dimensions for your material.
- Save the project and export a new pattern set. After changing the dimensions, the previous files no longer correspond to the project.
Dimension reference for this model: Stitching line. Dimensions in the parts table and the outer cut contour may differ due to the seam allowance. How to check seam allowances and stitching lines.
Materials and assembly
Select the leather thickness and flexibility during trial assembly.
File preparation
Printing patterns on A4 at 1:1 scale · DXF units and layers before cutting
Next step
Construction and export instructions · Manual contour editing · All models